Glossary
What is a Single-Stage HVAC System?
A single-stage, or single-speed, system is the base-level HVAC system. A single-stage air conditioner, single-stage furnace, or single-stage heat pump all have two settings - on or off. This means each time the thermostat signals the unit to heat or cool, the system comes on and operates at 100% capacity.
Single-stage HVAC systems work at full speed to warm or cool your home. Once it has reached the set temperature, the system shuts off. Then, once the temperature in your home rises or falls a couple of degrees, the system turns on again. A single-stage air conditioner may have trouble with consistent dehumidification and can result in hot and cold spots as well.
Single-stage AC units and furnaces cost less than other comparable units because of their simpler technology. However, because of the frequent on-off cycle, a single-stage HVAC system can be the most expensive to operate.
Single-stage vs two-stage HVAC
What is the difference between 1-and-2-stage HVAC? Simple. Instead of having just one stage where it operates at full power or not at all, a 2-stage air conditioner, heat pump, or furnace has two heating and cooling stages. It can operate at 65% or 100% capacity.
On a day with milder outdoor temperatures, the system would run at a lower speed most of the time. During a heat wave or bitterly cold temperatures. The system would run at 100% capacity most of the time.
The two stages give you a more consistent temperature. In general, a two-stage system will be more energy efficient than a single-stage system.
What is the cost difference between single-stage and two-stage AC units?
A two-stage system will cost more than a single-stage system upfront. But the energy savings and lower utility bills can help make up the difference.
The increased comfort level may also make a two-stage system worth the extra money.
Variable-speed HVAC system
A variable-speed system is a third option for AC units and heat pumps. It’s the most energy-efficient HVAC system, but is also more expensive upfront. In American Standard units, the variable speed system has more than 700 speeds to offer you optimal indoor temperature and humidity control, even on the hottest days.
Variable-speed units can run anywhere from 25% to 100% capacity. This provides you with precise heating and cooling temperature control. Variable-speed ACs and heat pumps may run longer at lower speeds, but use less energy.
Work with HVAC professionals
Need more information on a single-stage vs 2-stage furnace or air conditioner vs a variable speed system? Contact your local American Standard dealer for expert product recommendations tailored to your home, climate, and budget.
Expert review by Mark Woodruff, Senior Product Manager, Ducted Outdoor