Home / Cost Guide
HVAC Installation Cost Guide
Learn what goes into your HVAC replacement cost.
New HVAC System Prices
Select a product category to compare prices and features. On smaller screens, swipe across each table to see all products.
Product
| |||
|---|---|---|---|
Estimated Costs Based on national averages for the equipment shown. Does not include accessories such as a thermostat. Actual costs vary by home, installation needs, and location.* | $12,338 - $14,973
| $8,681 - $11,019
| $7,598 - $10,107
|
Stages Your product runs at different stages, or levels of output, to reach your desired temperature and temperature consistency. | Variable
| Multiple
| Single
|
Noise Level 70 decibels compares to a vacuum cleaner. Upper 70s can be loud for some. | 64-76 dBA
| 72-74 dBA
| 71-73 dBA
|
Efficiency Rating Higher Seasonal Energy Efficiency Ratings (SEER) mean more energy efficiency. | Up to 24 SEER2
| Up to 17.1 SEER2
| Up to 17 SEER2
|
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
Central Air Conditioner FAQs
Assuming this is a replacement of an existing system, the air conditioner prices listed above include the new AC unit cost and labor costs, as well as the basic accessories and services your dealer will provide pre-tax. Your local pro may include other accessories and/or services, which could change the price. To learn more, contact your American Standard dealer.
- Single-stage units are either on and running at 100%, or off.
- American Standard multi-speed systems have up to 13 speeds to provide more consistent temperature and humidity control and are a bridge between standard units and premium variable-speed units
- American Standard variable-speed units can run from 30% capacity to 100% capacity to provide precise temperature and humidity control, and the quietest operation. They may run longer at lower speeds, and can communicate with other system components for consistent, energy-efficient comfort.
SEER2, or Seasonal Energy Efficiency Ratio, measures how efficient a unit is at cooling your home. The higher the SEER2 rating, the more efficient the unit is. A more energy-efficient system can help you save money on your energy bills for many years.
The cost of air conditioning units with higher SEER2 ratings will be higher upfront, but the energy savings should pay for the difference in cost, especially if you live in a hot and humid climate. Your actual savings will depend on your usage, set temperature, climate, and more.
We wouldn't call any of our AC units loud. Instead, we would rate them Quiet, Quieter, and Quietest. A variable-speed system running at the lowest speed would be quietest, but the single-stage system could still be called quiet.
Learn more about decibel levels and sound ratings.
Product | |||
|---|---|---|---|
Estimated Costs Based on national averages for the equipment shown. Does not include accessories such as a thermostat. Actual costs vary by home, installation needs, and location.* | $6,432 - $7,138 | $5,567 - $5,975 | $5,085 - $5,558 |
Stages Your product runs at different stages, or levels of output, to reach your desired temperature and temperature consistency. | Multiple | Multiple | Single |
Fuel Type | Gas | Gas | Gas |
Efficiency Rating Higher AFUE ratings mean your unit is more energy efficient. | 80% AFUE | 80% AFUE | 80% AFUE |
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
80% Furnace FAQs
AFUE for Annual Fuel Utilization Efficiency. It measures the average annual fuel efficiency of a furnace. A higher AFUE means your furnace is more energy efficient at generating heat and minimizing waste. People in colder climates who run their furnace from October through April could save money on heating bills by installing a more efficient furnace.
Learn more in our Furnace Replacement Buyer's Guide
The cost to replace your furnace with a new American Standard gas furnace includes product and labor costs, as well as the basic accessories and services your dealer will provide pre-tax, such as removal of the old unit. Your local pro may include other accessories and/or services, which could change the price. For a specific quote on the cost of a new furnace, contact your local American Standard dealer.
- Single-stage units are either on and running at 100%, or off.
- Two-stage units have a high and low speed to save energy.
- Multi-speed systems have several speeds and are a bridge between two-stage units and pricier variable-speed units.
- Variable-speed units can run from 30% capacity to 100% capacity to provide precise comfort. They adjust automatically and can communicate with other system components for optimal comfort.
- High-efficiency modulating gas furnaces work like a dimmer light switch with a variety of adjustable settings. Modulating burner gas valves operate between 40% and 100%, depending on your specific heating needs, providing more even comfort and greater fuel efficiency. Our high-efficiency furnaces are a great option for areas with long and bitterly cold winters.
Product | |||
|---|---|---|---|
Estimated Costs Based on national averages for the equipment shown. Does not include accessories such as a thermostat. Actual costs vary by home, installation needs, and location.* | $7,821 - $9,023 | $6,983 - $7,598 | $6,440 - $7,093 |
Stages Your product runs at different stages, or levels of output, to reach your desired temperature and temperature consistency. | Multiple | Multiple | Single |
Fuel Type | Gas | Gas | Gas |
Efficiency Rating Higher AFUE ratings mean your unit is more energy efficient. | 97% AFUE | 96% AFUE | 96% AFUE |
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
90% Furnace FAQs
AFUE for Annual Fuel Utilization Efficiency. It measures the average annual fuel efficiency of a furnace. A higher AFUE means your furnace is more energy efficient at generating heat and minimizing waste. People in colder climates who run their furnace from October through April could save money on heating bills by installing a more efficient furnace.
Learn more in our Furnace Replacement Buyer's Guide
The cost to replace your furnace with a new American Standard gas furnace includes product and labor costs, as well as the basic accessories and services your dealer will provide pre-tax, such as removal of the old unit. Your local pro may include other accessories and/or services, which could change the price. For a specific quote on the cost of a new furnace, contact your local American Standard dealer.
- Single-stage units are either on and running at 100%, or off.
- Two-stage units have a high and low speed to save energy.
- Multi-speed systems have several speeds and are a bridge between two-stage units and pricier variable-speed units.
- Variable-speed units can run from 30% capacity to 100% capacity to provide precise comfort. They adjust automatically and can communicate with other system components for optimal comfort.
- High-efficiency modulating gas furnaces work like a dimmer light switch with a variety of adjustable settings. Modulating burner gas valves operate between 40% and 100%, depending on your specific heating needs, providing more even comfort and greater fuel efficiency. Our high-efficiency furnaces are a great option for areas with long and bitterly cold winters.
Product | |||
|---|---|---|---|
Estimated Costs Based on national averages for the equipment shown. Does not include accessories such as a thermostat. Actual costs vary by home, installation needs, and location.* | $13,504 - $16,777 | $10,074 - $13,106 | $9,426 - $11,951 |
Stages Your product runs at different stages, or levels of output, to reach your desired temperature and temperature consistency. | Variable | Multiple | Single |
Noise Level 70 decibels compares to a vacuum cleaner. Upper 70s can be loud for some. | 51-74 dBA | 63-75 dBA | 71-75 dBA |
Efficiency Rating Higher SEER2 and HSPF2 ratings mean your unit is more energy efficient. | Up to 22.4 SEER2 | Up to 17.1 SEER2 | Up to 17 SEER2 |
HSPF2 Heating Seasonal Performance (HSPF2) measures how efficiently a heat pump can heat your home during cold weather months. | Up to 10.5 HSPF2 | Up to 11 HSPF2 | Up to 8.5 HSPF2 |
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
Heat Pump FAQs
Price ranges include product and labor costs, as well as the basic accessories and services your dealer will provide pre-tax. Your local pro may include other accessories and/or services, which could change the price. Contact your local American Standard dealer for specific pricing.
- Single-stage units are either on and running at 100%, or off.
- Two-stage units have a high and low speed to save energy.
- American Standard multi-speed systems have several speeds to provide more consistent temperature and humidity control and are a bridge between two-stage units and pricier variable-speed units.
- American Standard variable-speed units can run from 30%-100% capacity to provide precise temperature and humidity control, and the quietest operation. They adjust automatically and can communicate with other system components (such as an air handler or furnace) for optimal comfort.
SEER2 stands for Seasonal Energy Efficiency Ratio. It represents the unit's cooling efficiency during the entire cooling season. SEER2 replaces the previous SEER rating. A higher SEER2 rating means your unit is more energy-efficient. A more energy-efficient system will cost more upfront, but your energy savings should pay for the cost difference of the upgrade. Your actual savings will depend on your usage, set temperature, climate, and more.
We wouldn't say that any of our heat pumps are noisy. Instead, we would rate them Quiet, Quieter, and Quietest. A single-stage system might be quiet, while a variable-speed system running at the lowest speed would be quietest. One caveat: your heat pump will sound louder during the brief defrost mode.
Product | |||
|---|---|---|---|
Estimated Costs Based on national averages for the equipment shown. Does not include accessories such as a thermostat. Actual costs vary by home, installation needs, and location.* | $7,598 - $12,889 | $7,514 - $11,132 | $7,398 - $9,096 |
Stages Your product runs at different stages, or levels of output, to reach your desired temperature and temperature consistency. | Multiple | Multiple | Multiple |
Noise Level 70 decibels compares to a vacuum cleaner. Upper 70s can be loud for some. | 52-62 dBA | 53-62 dBA | 58-68 dBA |
Efficiency Rating Higher SEER2 and HSPF2 ratings mean your unit is more energy efficient. | Up to 19.5 SEER2 | Up to 19.5 SEER2 | Up to 16 SEER2 |
HSPF2 Heating Seasonal Performance (HSPF2) measures how efficiently a heat pump can heat your home during cold weather months. | Up to 9.2 HSPF2 | Up to 9.4 HSPF2 | Up to 8.1 HSPF2 |
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
Low-Profile Heat Pump FAQs
Price ranges shown for low-profile heat pump installation include product and labor costs, as well as the basic accessories and services your dealer will provide pre-tax. Your local pro may include other accessories and/or services, which could change the price. Contact your local American Standard dealer for specific pricing.
Our low-profile heat pumps use multi-speed technology for enhanced performance. American Standard multi-speed low-profile heat pumps provide more consistent temperature and humidity control and are a bridge between standard single-stage and two-stage units and premium variable-speed heat pumps. They can operate at 70-100% capacity.
SEER2 stands for Seasonal Energy Efficiency Ratio. It represents the unit's cooling efficiency during the entire cooling season. SEER2 replaces the previous SEER rating. A higher SEER2 rating means your unit is more energy-efficient. A more energy-efficient system will cost more upfront, but your energy savings should pay for the cost difference of the upgrade. Your actual savings will depend on your usage, set temperature, climate, and more.
HSPF2 stands for Heating Seasonal Performance Factor. This industry rating measures the average annual energy efficiency of your heat pump operating in heating mode during the fall and winter heating season. A higher HSPF2 means your heat pump is more energy efficient.
More energy-efficient heat pumps can help reduce your energy consumption, saving you money on your energy bills. Your actual savings will depend on your climate, temperature settings, local electricity rates, and more.
They can certainly be quieter than standard units. Our low-profile heat pumps are specifically engineered to function quietly, minimizing noise levels. This feature is especially valuable in residential areas where noise can be a significant concern.
Learn more about decibel levels and sound ratings.
Product | |||
|---|---|---|---|
Estimated Costs Based on national averages for the equipment shown. Does not include accessories such as a thermostat. Actual costs vary by home, installation needs, and location.* | $10,175 - $15,739 | $8,097 - $12,733 | $8,515 - $10,027 |
Stages Your product runs at different stages, or levels of output, to reach your desired temperature and temperature consistency. | Multiple | Multiple | Multiple |
Noise Level 70 decibels compares to a vacuum cleaner. Upper 70s can be loud for some. | 53-62 dBA | 55-62 dBA | 60-62 dBA |
Efficiency Rating Higher SEER2 and HSPF2 ratings mean your unit is more energy efficient. | Up to 21 SEER2 | Up to 18.5 SEER2 | Up to 19 SEER2 |
HSPF2 Heating Seasonal Performance (HSPF2) measures how efficiently a heat pump can heat your home during cold weather months. | Up to 9.2 HSPF2 | Up to 9.1 HSPF2 | Up to 10 HSPF2 |
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
Cold-Climate Heat Pump FAQs
Price ranges include product and labor costs, as well as the basic accessories and services your dealer will provide pre-tax. Your local pro may include other accessories and/or services, which could change the price. To learn more, contact an American Standard local pro.
All of our low-profile cold climate heat pumps use multi-speed technology for enhanced performance. American Standard multi-speed low-profile heat pumps provide more consistent temperature and humidity control and are a bridge between standard single-stage and two-stage units and premium variable-speed heat pumps. They can operate at 70-100% capacity.
SEER2 stands for Seasonal Energy Efficiency Ratio. It represents the unit's cooling efficiency during the entire cooling season. SEER2 replaces the previous SEER rating. A higher SEER2 rating means your unit is more energy-efficient. A more energy-efficient system will cost more upfront, but your energy savings should pay for the cost difference of the upgrade. Your actual savings will depend on your usage, set temperature, climate, and more.
HSPF2 stands for Heating Seasonal Performance Factor. It measures the average heating efficiency of your heat pump during colder weather. A higher HSPF2 means your heat pump is more energy efficient. Our cold climate heat pumps use advanced inverter technology to remain highly efficient in even the harshest conditions.
They can certainly be quieter than standard units. Our low-profile cold climate heat pumps are specifically engineered to function quietly, minimizing noise levels. This feature is especially valuable in residential areas where noise can be a significant concern.
Learn more about decibel levels and sound ratings.
Product | |||
|---|---|---|---|
Estimated Costs Based on national averages for the equipment shown. Does not include accessories such as a thermostat. Actual costs vary by home, installation needs, and location.* | $7,167 - $8,847 | $6,542 - $7,893 | $5,229 - $6,440 |
Stages Your product runs at different stages, or levels of output, to reach your desired temperature and temperature consistency. | Variable | Constant Torque | Constant Torque |
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
Air Handler FAQs
Price ranges shown for air handler replacement include product and labor costs, as well as the basic accessories and services your dealer will provide pre-tax. Your local pro may include other accessories and/or services, which could change the price. Contact your local American Standard dealer for specific pricing.
American Standard air handlers have a range of motor efficiencies. Variable-speed motors provide the highest efficiency and comfort. By running longer at lower speeds, variable speed systems provide the highest level of humidity and temperature control. Constant torque motors are not quite as efficient as variable speed systems, but are more efficient than single-stage units, whose motor either runs at 100% or is off.
Learn more about speeds and stages.
*Your HVAC installation costs will vary based on geography, climate, home size, system size, system type, system efficiency ratings, home configuration, existing ductwork, and selected features. Estimates do not include required accessories or installation requirements. Estimates are not American Standard guaranteed, but provided to help you start planning and make the right decision for your home. An American Standard local pro can provide exact pricing after evaluating your home and comfort priorities.
HVAC Installation Costs at a Glance*
Nationwide ranges:
Central AC replacement cost | $7,598 - $14,973 |
Furnace replacement cost | $5,085 - $9,023 |
Heat pump replacement cost | $7,398 - $16,777 |
Cold climate heat pump replacement cost | $8,515 - $15,739 |
Air handler replacement cost | $5,229 - $8,847 |
Easy to maintain
So home comfort feels simple.
Backed by an Effective Warranty
For added peace of mind.
Supported by Dependable Service
That you can feel good about.
HVAC Installation Cost FAQs
If the indoor and outdoor components (furnace and AC unit) are about the same age and you're having more frequent and more expensive repairs, it's more cost-effective to replace the whole system at one time rather than one unit now and the other two years later.
Senior Systems Engineer Kimberly Sexton sums it up: "My advice to anyone who may have an aging system that requires frequent repairs is to consider replacing the whole system versus just one component. Typically, with an older system, the technology has become obsolete, and new parts are not completely compatible with older systems."
Your American Standard dealer can make specific recommendations.
Multiple factors affect the cost of replacing an HVAC system, including:
- Your climate
- The size and layout of your home
- How well insulated your home is
- Your existing ductwork
- The capacity and efficiency rating(s) of the HVAC units (ex. new air conditioning unit and furnace, heat pump and air handler, heat pump and furnace)
- And more
That's why each of our product categories shows a range of prices. The price ranges you see include the new HVAC unit cost and installation. Contact your local American Standard dealer to get the specific cost to install a new HVAC system in your home.
- Removal and responsible disposal of the old system.
- Flush existing refrigerant lines or install new line set (for AC units and heat pumps)
- Reconnect the gas line (for furnaces)
- Test system operation
- Cleanup after installation
- Reconnect to existing ductwork
- Educate you on the new thermostat and system
Like everything else, HVAC system replacement costs seem to keep going up. Higher materials costs, better technology, more complex systems, and higher labor costs all lead to an increased overall cost. However, with higher efficiency units, your system can potentially lead to long-term savings on your utility bills.
While the cost of a new American Standard HVAC system may seem high, a properly sized and installed system can last 15 years or more. Finally, financing a new HVAC system can help you spread the initial cost out over years. Explore HVAC financing.
Maybe. It depends on your priorities. A more efficient heating and cooling system can help you reduce energy consumption and save money on your utility bills for years to come. In addition, a multi-speed or variable-speed heat pump or air conditioner provides superior humidity control to increase your comfort. Explore savings opportunities
Assuming this is a replacement, your central AC unit cost will vary based on unit capacity, Seasonal Energy Efficiency Ratio (SEER2), and the number of stages or speeds. More efficient units with a higher SEER2 rating and a higher number of speeds will cost more than a lower SEER2 single-stage unit, for example. Contact your local American Standard dealer for the exact cost to replace an AC unit and indoor coil.
The cost to replace a furnace will depend on the Annual Fuel Utilization Efficiency (AFUE) rating of the unit, the capacity, heating stages, and more. For example, a modulating condensing furnace will cost more than a comparably sized single-stage unit with a lower AFUE rating.
Your overall gas furnace installation costs will be higher if you are replacing a standard furnace with a condensing unit because of the extra labor involved. Contact your American Standard dealer for a detailed quote on a new gas furnace installation.
The cost to replace an air source heat pump will vary based on the Heating Seasonal Performance Factor (HSPF2) and Seasonal Energy Efficiency Ratio (SEER2) ratings and the sizing of the unit. Higher-capacity, more efficient heat pumps will cost more than smaller-capacity units with lower efficiency ratings.
Contact your local American Standard dealer for detailed heat pump installation prices tailored to your home.
Your air handler replacement cost will vary based on which American Standard air handler you choose. Again, more efficient variable speed units will cost more upfront but can help you save on your energy bills. If you're converting to an all-electric system and replacing a gas furnace, opt for the 120V Modular Variable Speed Air Handler, a plug-and-play replacement that doesn't require electrical upgrades or retrofitting.
How long a new HVAC system will last depends on factors like usage, climate, product quality, the installer's skills, and how well you maintain the system. However, properly installed and maintained HVAC units are expected to last:
- Air Conditioners: 15 years
- Furnaces: 15-20 years
- Heat Pumps: 15-20 years
Systems can last longer if well-maintained, and break down earlier if you ignore HVAC maintenance.
Why trust us with your home comfort?
What other homeowners are saying
★★★★★
Great Value
Quiet and efficient. My electricity bill has measurably dropped for this summer
— Tom G in Missouri
★★★★★
Quiet and Comfortable
This HVAC unit blows our old unit out of the water. It is quiet, gets the house very cold very quickly, and the humidity control if worth every penny of the purchase price.
— R Lanphere in Florida
★★★★★
We couldn't have made a better e!
The quietness of the Platinum 95 is the first we noticed. The next was teh all over warmth of our home. And finally, the amazing change in our gas and electric bills!
— The Greens in Wyoming
-
Make finding and buying the right HVAC less complicated. Set yourself up for success with our HVAC buyers guide.
-
Learn about HVAC system energy tax credits or rebates that might help you save money on the purchase of your new system.
-
Contact your local dealer to learn about your HVAC system financing options. Furnace or air conditioning financing can make home installation a breeze.
Get more guidance on choosing a new HVAC system
Visit our HVAC Replacement Resource Guide to find information on everything you need to consider when it comes to replacing your HVAC system.
We’re here to help
Connect with our Customer Care team about your products, warranties, and dealer concerns.
Available Monday – Friday from 7am to 5pm CST
Contact a local dealer
Dealers can answer questions, help you find the right products for your home, and repair your system.
*The nationwide price ranges shown above are provided for general planning purposes and are not guaranteed by American Standard. Actual installation costs can vary based on your home's size, system type, efficiency preferences, local labor rates, equipment availability, and the complexity of the installation. For an exact quote tailored to your home and comfort priorities, contact your local American Standard Heating & Air Conditioning dealer.













